MAC OS 9.2.2 TO MAC OS X 10.0 SERIAL
MAC OS 9.2.2 TO MAC OS X 10.0 PLUS

This is a limitation of the Apple Partition Map. Keep in mind that PowerPC Macs cannot use hard drives over 16 TB capacity, depending on the OS X version. This could be a good place to use a Power Mac G5, as they accept readily available SATA drives, and 3.5вЂі SATA drives provide a lot of storage for the money. If you want to set up a shared volume for Time Machine backups, you need to be running Mac OS X 10.5 or later. The dual-processor Mystic Power Mac G4 was the first to support gigabit ethernet, making it a reasonably priced choice, and the second CPU really makes a difference with Mac OS X. 10Base-T was good in its day, 100Base-TX was very nice, but if moving files as quickly as possible matters вЂ“ especially big files вЂ“ thatвЂ™s why you want to look into gigabit.

Maximum Throughput, Maximum CapacityДЇor the best throughput, pick a Mac with gigabit ethernet as your file server. OS X 10.4 supports almost every Mac with a G3 CPU, making it a great way to use some legacy hardware as a server. OS X 10.3 is a bit faster and still has pretty low hardware requirements. OS X 10.2.8 on your server would give you coverage of the entire Mac spectrum of Macs with networking. The Take-Away: All versions of Mac OS X from 10.1 through 10.10 can communicate with each other (and likely newer versions as well). Mac OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks, and 10.10 Yosemite can only connect to Macs running a version of Mac OS X they cannot connect to file sharing on any Mac running the Classic Mac OS. They are also compatible with OS X versions up to 10.10. Mac OS X 10.4, 10.5, and 10.6 Snow Leopard require Mac OS 9.0 or later or AppleShare IP 5 or 6 they cannot connect to older versions of the Classic Mac OS.

MAC OS 9.2.2 TO MAC OS X 10.0 PLUS

Mac OS X 10.3 Panther supports the same connections plus AppleShare Server 3 and newer. Mac OS X 10.1 through 10.2.8 can connect to Personal File Sharing in System 7 through 9.2.2 as well as Mac OS X versions up to 10.10 Yosemite. Yosemite was the latest version of Mac OS X when the Classic Mac Networking article was last updated. If you need to support all versions of the Classic Mac OS since 3.3, OS X 10.2 is your best bet. The Take-Away: If you donвЂ™t need Macs with System 3.3 through 7.5.2, both OS X 10.3 and 10.4 are solid options.

Mac OS 9.0 to 9.2.2 support all the same connections but do not require using Guest access on OS X Leopard. Mac OS 8.1 through 8.6 support all the same connections as 7.5.3-7.6.1 and can also access Mac OS X 10.5 Leopard using Guest access only. These are the oldest Mac OS versions that can access shared files on Mac OS X 10.3 Panther and 10.4 Tiger. Macs running System 7.5.3 to 7.6.1 can connect to ASFS 2.0.1 and later as well as Personal File Sharing in System 7 and later. If youвЂ™re a Classic Mac OS fan, Mac OS 9.2.2 is another good choice. The Take-Away: Mac OS X 10.2.8 is a solid option if you need to connect Macs running System 3.3 through 7.5.2. Macs running System 6 and 7.0-7.5.2 with AppleShare WS 3.5 installed can also connect to ASFS 2.0.1 and higher as well as Personal File Sharing in System 7 through 9.2.2 and OS X 10.1 through 10.2.8.

MAC OS 9.2.2 TO MAC OS X 10.0 SERIAL

Networking is only possible using LocalTalk, AppleShare WS (for workstation) 1.1 must be installed on the client Macs, and you need to use a LocalTalk Gateway to connect to an Ethernet network, which requires a Mac with both Ethernet and Mac serial ports like those in the photo. Macs running System 3.3 with Finder 5.4 (the Mac 512K and 512Ke) through System 5.1 can connect to AppleShare File Server (ASFS) 2.0.1-4* and Personal File Sharing in System 7 through 9.2.2 as well as to Mac OS X 10.1** through 10.2.8 Jaguar.

Mac os 9.2.2 to mac os x 10.0